Prosoft-technology 5201-MNET-101S Uživatelský manuál stáhnout pdf (Strana 43)

IEC-101 Slave ♦ ProLinx Communication Gateway 101S Protocol Configuration

IEC 60870-5-101 v3 Slave (Firmware version 3.xx) Protocol Manual

ProSoft Technology, Inc. Page 43 of 159

August 6, 2010

2.5 [M_ST_NA_1]

This section defines the monitored step database. This information is sourced

from the database and is transferred to the remote Master unit.

This section takes the following parameters:

 P

OINT #

 DB

ADDRESS

 G

ROUPS (page 50)

 IV

DB BIT

Each point consumes one, 8-bit byte. The

DB ADDRESS value corresponds to the

byte offset address in the database.

The DB

ADDRESS should be located in a database area that is being constantly

moved from the gateway to the Master.

For additional information on how to set these parameters, see the Reference

chapter of this manual.

2.6 [M_BO_NA_1 104]

This section defines the Monitored 32-bit Bitstring Data Point database. This

information is sourced from the database and is transferred to the remote Master

unit.

This section takes the following parameters:

 Point #

 DB Address

 Groups (page 50)

 IV DB Bit

Each point is four 8-bit bytes (two 16-bit words) and the DB Address value

corresponds to the double word offset in the gateway memory database.

The DB address should be located in a database area that is being constantly

moved from the gateway to the Master.

For additional information on how to set these parameters, see the Reference

chapter of this manual.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 158 159

Žádné komentáře

Prosoft-technology 5201-MNET-101S Uživatelský manuál Strana 43