Prosoft-technology MVI69-PDPMV1 Uživatelský manuál stáhnout pdf (Strana 144)

Diagnostics and Troubleshooting MVI69-PDPMV1 ♦ CompactLogix or MicroLogix Platform

User Manual PROFIBUS DPV1 Master

Page 144 of 225 ProSoft Technology, Inc.

July 8, 2011

5.3 LED Indicators: Front of MVI69 Module

The LEDs indicate the module’s operating status. The module has two sets of

LED Indicators:

 MVI69 Module Status LEDs on the front of

the module near the top

 PROFIBUS Master Status LEDs behind the

door on the front of the module.

5.3.1 Module Status Indicators

Indicator Color Status Indication

CFG Green ON Configuration/Debug Port is active

OFF Configuration/Debug Port is inactive

P1 Not Used

P2 Not Used

APP STATUS Amber ON

Configuration Error: This LED is illuminated

when the PROFIBUS and module CRC values

do not match between input/output blocks.

Verify that the values match the values

generated with the Calculate Checksums button

in ProSoft Configuration Builder. If they do not

match, you must manually change the values at

the appropriate address locations listed in the

Input and Output block definitions in this manual.

OFF Normal operation

BP ACT Amber ON

The LED is ON when the module is able to

communicate over the backplane.

OFF

The LED is OFF when the module is unable to

communicate with the processor. The processor

is either absent or not running.

BATT Red OFF The battery voltage is OK and running.

The battery voltage is low or the battery is not

present. The battery LED will illuminate briefly

upon the first installation of the module or if the

unit has not had power for an extended period.

This behavior is normaL; however, should the

LED come on in a working installation, please

contact ProSoft Technology.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 224 225

Komentáře k této Příručce

Žádné komentáře

Prosoft-technology MVI69-PDPMV1 Uživatelský manuál Strana 144

Komentáře k této Příručce

Související produkty a manuály pro Relé Prosoft-technology MVI69-PDPMV1