Prosoft-technology MVI46-DFCM Uživatelský manuál Strana 83
- Strana / 103
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Reference MVI46-DFCM ♦ SLC Platform
DF1 Communication Module
ProSoft Technology, Inc. Page 83 of 103
October 20, 2008
Function Code #5 - Unprotected Write (Basic Command Set)
Column Parameter Description Parameter
1 Enable/Type Word 0=Disabled, 1=Continuous and 2=Conditional.
2 Virtual Database Address This parameter defines the database address of the first
data point to be associated with the command.
3 Poll Interval Minimum time in tenths of a second to wait before
polling with this command.
4 Count Number of data word values to be considered by the
function.
5 Swap Type Code Swap type code for command: 0=None, 1=Swap words,
2=Swap words & bytes and 3=swap bytes in each word.
6 Node Address Address of unit to reach on the data highway.
7 Function Code = 5 Unprotected Write Function
8 Word Address Word address where to start the write operation. P1
9 to 11 Not Used These fields are not used by the command. Values
entered in these columns will be ignored.
P2 to P4
This function writes one or more words of data to the PLC memory. This function
should work on the following devices: 1774-PLC, PLC-2, PLC-3, PLC-5, SLC
500, SLC 5/03, SLC 5/04 and MicroLogix 1000.
Function Code #100 - Word Range Write (PLC-5 Command) (Binary Address)
Column Parameter Description Parameter
1 Enable/Type Word 0=Disabled, 1=Continuous and 2=Conditional.
2 Virtual Database Address This parameter defines the database address of the first
data point to be associated with the command.
3 Poll Interval Minimum time in tenths of a second to wait before
polling with this command.
4 Count Number of data word values to be considered by the
function.
5 Swap Type Code Swap type code for command: 0=None, 1=Swap words,
2=Swap words & bytes and 3=swap bytes in each word.
6 Node Address Address of unit to reach on the data highway.
7 Function Code = 100 Word Range Write Command.
8 File Number PLC-5 file number to be associated with the command.
If a value of -1 is entered for the parameter, the field will
not be used in the command, and the default file will be
used.
P1
9 Element Number The parameter defines the element in the file where
write operation will start. If a value of -1 is entered for
the parameter, the field will not be used in the
command, and the default element will be used.
P2
10 Sub-Element Number This parameter defines the sub-element to be used with
the command. Refer to the AB documentation for a list
of valid sub- element codes. If the value is set to -1, the
default sub-element number will be used.
P3
11 Not Used This field is not used by the command. Values entered
in this column will be ignored.
P4
This function writes one or more words of data to a PLC data table. This function
should work on the following devices: PLC-5.
- MVI46-DFCM 1
- Please Read This Notice 2
- Contents 5
- 1 Start Here 9
- 1.2 Package Contents 10
- 1.3 Setting Jumpers 11
- 1.6.1 Configuring RSLinx 15
- In This Chapter 19
- 2.1 Module Configuration 21
- 2.2 MVI46-DFCM Configuration 21
- 2.2.2 Port 1 Setup 23
- 2.2.3 Port 2 Setup 26
- 2.2.4 Port 1 Commands 30
- 2.2.5 Port 2 Commands 30
- 2.2.6 Miscellaneous Status 30
- 2.2.7 Command Control 32
- 3 Ladder Logic 33
- 4.1.2 Required Hardware 36
- 4.1.3 Required Software 36
- 4.1.5 Main Menu 38
- Code Description 40
- 0 Transfer successful 40
- 4.1.6 Data Analyzer 41
- 4.1.7 Data Analyzer Tips 43
- 4.1.8 Database View Menu 46
- 4.2 LED Status Indicators 50
- 4.2.2 Troubleshooting 52
- 5 Reference 53
- 5.2 Functional Overview 55
- 5.2.1 General Concepts 55
- 5.2.3 Module Data 69
- 5.3 Cable Connections 71
- 5.3.2 RS-232 74
- 5.3.3 RS-422 76
- 5.3.4 RS-485 76
- 9998 Warm boot the module 77
- 9999 Cold boot the module 77
- 5.5 Error Codes 78
- 5.5.1 Local STS Error Codes 78
- 5.6.1 Introduction 80
- 5.6.2 Command Function Codes 81
- 5.7 DF1 Command List Form 92
- 6.2.1 All Product Returns: 94
- 6.3 LIMITED WARRANTY 96
- 6.3.8 No Other Warranties 99
- 6.3.9 Allocation of Risks 99
Související produkty a manuály pro Relé Prosoft-technology MVI46-DFCM
Relé Prosoft-technology MVI46-DFNT Uživatelský manuál
(177 stránky)
(177 stránky)
Relé Prosoft-technology PTQ-104C Uživatelský manuál
(136 stránky)
(136 stránky)
Relé Prosoft-technology PTQ-AFC Uživatelský manuál
(174 stránky)
(174 stránky)
Relé Prosoft-technology PTQ-104S Uživatelský manuál
(201 stránky)
(201 stránky)
Relé Prosoft-technology AN-X-TI Uživatelský manuál
(73 stránky)
(73 stránky)
Relé Prosoft-technology PTQ-PDPMV1 Uživatelský manuál
(306 stránky)
(306 stránky)
Relé Prosoft-technology AN-X-AMX Uživatelský manuál
(44 stránky)
(44 stránky)
Relé Prosoft-technology AN-X-AMX Uživatelský manuál
(50 stránky)
(50 stránky)
Relé Prosoft-technology AN-X-AMX Uživatelský manuál
(55 stránky)
(55 stránky)
Relé Prosoft-technology AN-X-AMX Uživatelský manuál
(68 stránky)
(68 stránky)
Relé Prosoft-technology AN-X2-SQD Uživatelský manuál
(51 stránky)
(51 stránky)
Approx APPGRABBERV3 manuali
Manuali dei proprietari e guide per l'utente per Sistemi di acquisizione video Approx APPGRABBERV3.
We fornisce 1 manuali pdf Approx APPGRABBERV3 per scaricare gratuitamente in base al tipo di documento: Scheda Tecnica
Komentáře k této Příručce