Prosoft-technology MVI56E-SIE Uživatelský manuál stáhnout pdf (Strana 56)

Configuring the MVI56E-SIE Module MVI56E-SIE ♦ ControlLogix Platform

User Manual Client Communication Module

Page 56 of 168 ProSoft Technology, Inc.

September 6, 2012

Each command list record has the same general format. The first part of the

record contains the information relating to the communication module, and the

second part contains information required to interface to the Siemens Industrial

Ethernet server device.

Command Entry Formats

The following table shows the structure of the configuration data necessary for

each of the supported commands.

The first part of the record is the module information, which relates to the MVI56E

module, and the second part contains information required to interface to the

server device.

Command list example:

Enable

NO (0) or YES (1)

This parameter specifies whether or not the command is to be executed.

Value

Description

NO (0)

The command is disabled and will not be executed in the normal polling sequence.

YES (1)

The command is executed each scan of the command list if the Poll Interval Time is

set to zero (0). If the Poll Interval time is set, the command will be executed when the

interval timer expires.

Important: The commands must also be enabled in the ladder logic in order for

them to be executed. The SIE.CONTROL.CmdControl.WriteCmdBits[x] controller

tag array holds 16-command bit arrays for each Client. If a bit for a specific

command is set to zero (0) in the WriteCmdBits[x] controller tag, the command

will not be executed, regardless of its enabled or disabled state in the

configuration. For more information, see Command Control Blocks (page 144).

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Enable

Code

Internal

Address

Poll Interval

Time

Count

Swap

Code

IP Address Rack Slot TSAP Func Type Data Type

Address

Type

DB Number Address

Code Register 1/10 th Sec

Bit/Byt

e/Wor

d/Dwo

Code IP Address

Rack

Number

Slot Number

(Not used on

S7-200)

Only used

on S7-200

(refer to

MicroWin

set up)

Read/Write

Bool/Byte/In

t/Dint/Real/

Time/Count

DB/Inpu

t/Outpu

t/Flag/T

imer/Co

unter

Only used

for address

type DB

Address in

the

Siemens

processor

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 167 168

Komentáře k této Příručce

Žádné komentáře

Prosoft-technology MVI56E-SIE Uživatelský manuál Strana 56

Komentáře k této Příručce

Související produkty a manuály pro Relé Prosoft-technology MVI56E-SIE